Garage Floor Epoxy
Broadcast flake epoxy over a ground builder slab, a solid first coating for a garage that has only ever seen tires.
Read more
Epoxy Flooring in Enterprise / Enterprise, NV
Epoxy Flooring in Enterprise, NV
Flake and polyurea garage floors, metallic rooms and pool deck resurfacing for homes in Mountain's Edge, Southern Highlands and along St. Rose Pkwy. Builder slabs get ground, tested and priced in writing before we start.
✓ Builder finish ground off
✓ Color-stable polyaspartic topcoats
✓ Blue Diamond Rd to I-15
Coverage map
Newer streets all over Enterprise
This is the newest housing in the valley, about 84% built since 2000, spread over 66 square miles of land.
Master plan
Mountain's Edge
Homes around S Buffalo Dr in ZIP 89178, many garages still on bare builder concrete.
Golf community
Southern Highlands
ZIP 89141, around the Southern Highlands Golf Club, with its own architectural review.
Split area
Silverado Ranch, west
The park on S Gillespie St is on this side; the boulevard's east end is not.
I-15 side
South Point area
The stretch of Las Vegas Blvd S around South Point, close to I-15.
Fully inside
ZIP 89139
One of two ZIPs that sit wholly inside the town, along with 89141.
North edge
89113 and 89118
Shared with Spring Valley, so these streets are closest to our base.
Local notes
Builder slabs: what do they need?
Mountain's Edge
A never-coated garage still has the builder's smooth trowel finish, sometimes with a curing film. Resin sits on that instead of gripping, and a hot tire can lift it.
Southern Highlands
The community association publishes an architectural review application. Check it before exterior work; we put color, material and scope in writing for the form.
Silverado Ranch
The area straddles two census towns, with the park on this side and the east end next door. For your floor it changes nothing, but we note the right place on the estimate.
Homes built since 2020
About 6% of homes here are this new. Their slabs are past the 28-day mark, but we still read moisture before priming.
Coating seasons
Picking a month in Enterprise
Nov-Feb
Cool season
Lower temperatures stretch cure times, which makes a fast polyaspartic system more useful.
Mar-Apr
Spring gusts
Spring brings windy spells. Where lots are still under construction, dust finds an open garage fast, so doors stay shut while coats are wet.
May-Jun
Heat builds
100F days start in May at the airport station and climb through June. Fresh resin moves faster each week, so coat timing follows the slab.
Jul-Sep
Peak and monsoon
Monsoon moisture typically arrives in July and August. Muggy afternoons near the dew point are skipped for coating, then work resumes.
Which Enterprise ZIPs are covered?
The four main ZIPs plus the edges the town shares with its neighbors. 89139 and 89141 sit entirely inside the town. Same process at every address.
891138911889123891398914189148891788917989183
What does a young housing stock mean for floors?
Most garages here won't have been coated, so we start from scratch with the builder's surface. Half of homes were built between 2000 and 2009, and 28% in the 2010s. The median build year is 2007, the newest in the valley. As the slabs generally won't have old paint, we typically just grind the smooth trowel finish and curing film down to an open profile. With 73% of homes detached and 64% owner-occupied, the usual floor is a single-family garage slab less than 20 years old. A flake system with a polyaspartic top coat suits this well, and it holds up to the summer sun.
We don't assume a young slab is a dry one. Each gets a moisture test, hairline cracks get filled, and the system on your estimate matches how you use the garage.
Why us
What a first coating should include
A first coating sets how the floor ages. We grind off the builder finish, fill hairline cracks, test moisture and use a topcoat that won't amber in sun. The estimate names each step, so you can compare it line for line.
- Builder trowel finish ground off
- Moisture tested, never assumed dry
- Hairline cracks filled first
- Non-ambering polyaspartic topcoats
- Every step listed in writing
- Locally owned, next door
At a glance
240,464
Residents, ACS 2020-24 estimate
2007
Median year built, newest in the valley
84%
Homes built since 2000
66 sq mi
Land area
What we do
Coatings we install in Enterprise
From a first garage coating to a polished shop floor, all on existing concrete. Each card links to the full service page.
Polyaspartic & Polyurea
Polyurea and polyaspartic floors that cure quickly and resist yellowing, so the garage is back in use sooner.
Read more
Metallic Epoxy Floors
Metallic epoxy with a deep, liquid look for game rooms and interior floors where the floor is the feature.
Read more
Pool Deck & Cool Deck
Textured cool deck and coatings that renew existing backyard pool decks and patios on concrete.
Read more
Commercial & Polished Concrete
Epoxy and polished concrete for warehouses and businesses near I-15 and Las Vegas Blvd South.
Read more
Concrete Staining & Sealing
Stain and seal plain gray patios and walks so newer concrete gets color without a full coating.
Read more01
New-build floors
If you can, yes. An empty garage is quicker to prep and coat, and the slab is old enough once the house is done, since coatings need concrete at least 28 days old. We still grind off the trowel finish and read moisture first.
Because smooth concrete gives resin almost nothing to hold. Thin films on unprepped floors are what peel at the tire tracks after a hot drive home. Diamond grinding leaves a rough profile the base coat locks into, and it strips any curing compound left from the pour.
Check before booking. The Southern Highlands Community Association publishes an architectural review application, and exterior changes like a driveway coating are the kind of work such reviews cover. Interior garage floors may be treated differently. We supply color, material and scope in writing for the form.
Both work indoors. Epoxy builds thickness well and is the classic base coat. Polyaspartic cures faster and stays color-stable under UV, which matters if the door stays open. Many floors pair them: an epoxy body under a polyaspartic topcoat.
Yes, on both sides of the line. The park on S Gillespie St is on this side of the line, and South Point on Las Vegas Blvd S is too. Streets at the east end of Silverado Ranch Blvd sit just over the line, and we coat them the same way.
02
HOAs and timing
Any month works with the right timing. Winter stretches cure times and summer shortens working time, so we adjust batch size and the gap between coats rather than waiting for a season. The one thing we avoid is coating on a muggy afternoon near the dew point.
Not if they're treated. Hairline cracks are normal even in young concrete. We route and fill static cracks before the base coat and leave control joints able to move. A flake broadcast also hides small lines visually.
Yes, on existing concrete decks and patios. A textured cool deck finish gives wet feet more grip than smooth concrete, and many people pick light colors because dark, smooth decks get hot underfoot. We don't do pool plumbing or equipment, and timing is set once we've seen the deck.
Sweep grit often, since sand is what dulls a topcoat over time. Mop with plain water or a mild cleaner, and wipe spills before they dry; mineral spots show up where hard water evaporates. A mat by the door into the house keeps tracked-in dust down too.
We grind with a vacuum shroud on the grinder, which pulls dust off at the source. The door into the house stays shut, and we vacuum the slab before any coating goes down. Grinding is the noisy part; once coating starts, the work is quiet.