Garage Floor Epoxy
A ground slab, flake epoxy base and clear topcoat, built to take hot tires and the dust that blows in under the door.
Read more
Pool Deck & Cool Deck / Spring Valley, NV
Pool Deck Resurfacing in Spring Valley, NV
We resurface and recoat the concrete deck around your pool: cool deck texture, acrylic or polyaspartic deck coatings, and the crack and spall repair that comes first. Deck surface only. Backyards across Spring Valley and the rest of Clark County.
✓ Crack and spall prep first
✓ Light, textured deck finishes
✓ Backyards across Clark County
Is your pool deck showing Las Vegas valley wear?
Most deck calls from Spring Valley start with one of these six. See two or more on yours and the surface is usually due for a recoat or a full resurface.
Hairline cracks
Fine cracks run through the texture as the slab moves. We route and fill them before any new coat goes down.
Spalled patches
Chips and shallow pits where the top layer has broken loose. The loose material comes out, then we patch it flush.
Chalky, faded color
Summer UV here reaches the extreme range. Over the years it bleaches the color and leaves a dull, powdery surface.
White mineral rings
Splash water that dries on the deck. Valley water runs about 16 grains per gallon, and the minerals stay when it evaporates.
Worn-flat texture
Bare feet and pool toys flatten the knockdown peaks, so the wet spots by the steps feel slicker than they used to.
Peeling old paint
A past paint or sealer job lifting in sheets. It has to come off first, or the new coat peels right along with it.
Valley backyards
Why do pool decks wear out so fast in Spring Valley?
Mostly sun, heat and hard water. Las Vegas had over 100 days of 100F+ in 2024, compared to about 78 in an average year. That heat, along with high summer UV, will cause your deck to lose its color and dry out. The water hardness in Las Vegas is around 16 grains per gallon, and any droplets left to dry on the concrete leave a build-up of minerals. Most Spring Valley homes were built in the 90s and 2000s, so many backyard decks have had decades of that sun. We deal with the whole surface: crack and spall repair, a brand-new cool deck or a polyaspartic deck coating. Pumps, pipework and lighting stay with your pool company.
Deck surface only
Written estimate first
Slab checked before coating
Locally owned
How a deck job runs
From cracked deck to fresh texture
1
First call
Call or send the form with the rough deck size, what it is finished with now, and a few photos of cracks or peeling if you have them.
2
Deck walk
We walk the deck, tap for hollow spots, look for old coatings and check moisture. Then the scope and price go into a written estimate.
3
Scheduling
We pick a date with you around the forecast. Cure speed follows the temperature, so summer work is planned around the heat of the day.
4
Resurface
Grind and clean, fill cracks, patch spalls, then lay the texture or coating and seal it. Wash water is collected, never sent down the gutter.
Compare deck finishes
Pool deck surfaces compared
Outdoor decks rule out some floor coatings. Here is how the common deck surfaces handle sun, wet bare feet and the prep each one asks for.
| Surface | Texture | In the sun | Prep it needs | Fits |
|---|---|---|---|---|
| Cool deck knockdown | Light, sprayed, peaks knocked flat | Made for outdoor decks | Sound, clean, profiled slab | Barefoot pool surrounds |
| Microtopping overlay | Thin troweled or stamped layer | Common on patios and decks | Moisture-checked slab, bond coat | Spalled or patchy decks |
| Polyaspartic deck coat | Thin film with grit broadcast in | Yes, aliphatic and UV-stable | Ground profile, cracks filled | Color plus a sealed surface |
| Standard epoxy | Smooth gloss | No, ambers and can blister | Not a deck system | Indoor floors only |
Why us
Why pool owners call our deck crew
Because we stick to the deck. No pumps, no heaters, no wiring. Just the concrete you walk on, done from the prep up, with the price in writing before anyone starts a grinder.
- Crack and spall prep included
- Written estimate before work
- Light, textured finishes
- Old coatings removed, not buried
- Vacuum-shrouded grinding
- Locally owned and run
Pool deck facts for the valley
~200,000
Residential pools in the valley (AP, 2022)
16 gpg
Water hardness (SNWA)
78
Normal days a year at 100F or above
120F
Record high, July 7, 2024
Other work
Floors and decks in Spring Valley
The deck is one job. Here are the other finishes we put down.
Polyaspartic & Polyurea
Fast-curing, UV-stable polyaspartic and polyurea coatings for garages that sit with the door open to afternoon sun.
Read more
Metallic Epoxy Floors
Swirled, one-off metallic epoxy for interiors and showrooms, laid over a pigmented primer on a carefully ground floor.
Read morePool Deck & Cool Deck
Cool deck texture and deck coatings for the concrete around your pool, with crack and spall prep done first.
Read more
Commercial & Polished Concrete
Epoxy for shops and warehouses, or mechanically polished concrete where you want the shine in the slab itself.
Read more
Concrete Staining & Sealing
Acid and water-based stains, dyes for indoor floors, and resealing for stamped or stained patios that have gone dull.
Read more01
Deck surfaces
Yes. A cool deck finish is an acrylic-cement texture sprayed and knocked down over existing concrete. The slab has to be sound, clean and profiled first, so we grind, fill cracks and patch spalls before the texture goes on. A loose or crumbling deck gets repaired before it gets texture.
Life depends more on prep and upkeep than on the label. Any texture or coating over a cracked, dirty or damp slab fails early. A polyaspartic deck coat holds its color in sun without ambering. Cool deck texture can be recoated when it fades instead of torn out.
Dark, smooth surfaces get hot underfoot in a Las Vegas summer, and light, textured ones are easier to stand on. That is why most backyards here end up with a light color and some grit, whether cool deck or a pale coating with texture.
Often, yes. If the texture is still stuck tight and the slab is sound, a cleaning, crack repair and fresh coat bring the color back. If a section sounds hollow when tapped, or flakes off in patches, that part has to come off first.
No. We work on the deck surface only: the concrete, its texture and its coating. Pumps, filters, heaters, plumbing, lights and wiring are separate trades, so keep your pool service company for those. If we spot a leak, we tell you.
02
Planning the job
It depends on size, condition and finish. Cracks, spalled spots, old coatings to strip and the system you pick all move it. After we walk the deck, you get a written estimate with the scope spelled out line by line.
Most of the year works. Cure speed follows the temperature, so in summer we plan around the heat of the day, and monsoon storms in July and August can move a date. We set the date with you around the forecast. No finish day is promised up front.
Cleaning and grinding, routing and filling static cracks, patching spalls and removing any coating that will not hold. Then the new texture or coating and its sealer. Expansion joints are left to move, not bridged over. Coping, tile, plumbing and equipment are not part of it.
Move furniture, planters and grills off the deck, and turn off any sprinkler zones that hit the concrete. Keep people and pets off the work area until we say it has cured. We mask the pool edge and coping along the area we are working next to.
Hose off splash water instead of letting it dry, since the minerals stay when water evaporates. Keep sprinklers aimed off the deck and sweep away blown dust after windy days. When the color starts to chalk, call us to look at a reseal or recoat before the texture wears through.