Garage Floor Epoxy
Flake epoxy over a ground, crack-filled slab, the standard upgrade for a Green Valley or Anthem garage.
Read more
Epoxy Flooring in Henderson / Henderson, NV
Epoxy Flooring in Henderson, NV
Coatings for Henderson garages, interiors and pool decks, from 1990s Green Valley slabs to new Cadence builds. We grind, test for moisture and put the price in writing first.
✓ Diamond-ground, never acid-etched
✓ UV-stable topcoats for sun
✓ Green Valley to Inspirada
Where we work
Master plans across Henderson
The city grew one master plan at a time, so the slab under your car depends a lot on which decade your neighborhood went up.
1990s plan
Green Valley
Homes around Paseo Verde Pkwy, where older slabs often need a past coating ground off first.
South end
Anthem
Homes around Anthem Center off Hampton Rd. Expect a moisture test and crack fill before flake.
Golf community
Seven Hills
Streets near Rio Secco Golf Club, where garage and driveway both take full sun.
Guard-gated
MacDonald Highlands
A 1,320-acre plan with two guard-gated entries and DragonRidge Country Club.
West side
Inspirada, 89044
Newer homes on the city's west side, where open desert still meets the streets.
East side
Cadence, 89011
Several builders around a central park of nearly 50 acres, so no two slabs get assumed alike.
Local notes
What we see on local slabs
Green Valley Ranch
Floors here can be 25 years old, with oil soaked in at the tire lines. Oil pushes fresh resin away and leaves small craters, so stained concrete gets ground out instead of covered.
Lake Las Vegas
Off Lake Las Vegas Pkwy, the floor in question is often outside: a patio or pool deck. Plain epoxy ambers in sun, so exterior work gets an aliphatic coat or textured cool deck.
Cadence
By move-in, a builder slab is long past 28 days old. Age isn't the issue; texture is. The slick trowel finish and any curing compound both get ground away.
Inspirada
The west side's newer streets sit beside open desert, and spring wind carries sand into open garages. We close up and vacuum the slab right before each coat.
Through the year
Which months suit a floor in Henderson?
Jan-Mar
Cool months
Cure slows as slabs cool, so coats get longer between passes. A fine window for 1990s garages that need heavy grinding first.
Apr-May
Wind season
The weather service says strong winds come mostly in spring and fall, bringing blowing dust. Garage doors stay down while coats are wet.
Jun-Sep
Heat
July's normal high is about 104.5F, and heat shortens working time on fresh resin. Fast-curing polyaspartic gets mixed in smaller batches.
Oct-Dec
Fall
With the monsoon usually gone by September, fall suits outdoor work: pool decks, patios and walkways that bake all summer.
Which ZIP codes do we cover?
All eight ZIPs that touch the city. 89044 is only about a quarter inside the city by land, so give us a cross street if you're near the edge.
8900289011890128901489015890448905289074
What do Henderson's homes mean for your floor?
Most of the garages in this area sit on 1990s or 2000s slabs. About 30% of homes were built in the 1990s and 31% in the 2000s, giving a median build year of 2001. The older Green Valley slabs will often be stained or cracked, with some wear to the surface. We grind to a clean concrete surface and fill any cracks before applying our base coat. The newer Cadence and Inspirada garages are much smoother but can still hold the builder's curing compound, which also has to come off. Two-thirds of homes are owner-occupied and 69% are detached, so most garages in the city suit a flake floor with a UV stable top coat.
We don't sell one system citywide. An older slab gets more grinding and crack work; a newer one gets its curing film removed and a moisture reading. Either way, the estimate says which coats go down and why.
Why us
Why Henderson owners call us about garage floors
Because prep is where floors fail, and we spend the most time there. Every garage gets diamond grinding with a vacuum shroud, a moisture check and crack repair before the first coat. You get the price and the system in writing first.
- Diamond grinding, vacuum-shrouded
- Moisture tested before coating
- Cracks filled as prep
- UV-stable topcoats outdoors
- Written estimate before work
- Locally owned, Spring Valley based
Fast facts
350,039
Residents, 2024 Census estimate
2001
Median year homes were built
66%
Homes owner-occupied
8
ZIP codes in our coverage
Our services
Floors we coat in Henderson
Garages, interiors, pool decks and shops, all on existing concrete. Each system below has its own page with the details.
Polyaspartic & Polyurea
Polyurea and polyaspartic systems that resist UV ambering, a fit for garages that sit open to afternoon sun.
Read more
Metallic Epoxy Floors
Swirled metallic epoxy for interior rooms and showpiece garages; it needs flawless prep because it hides nothing.
Read more
Pool Deck & Cool Deck
Cool deck texture and coatings for pool decks and patios, with grip for wet bare feet.
Read more
Commercial & Polished Concrete
Shop, office and warehouse floors off St. Rose Pkwy and Sunset Rd, coated or polished.
Read more
Concrete Staining & Sealing
Acid and water-based stains, then a sealer, for patios and walks that look tired and blotchy.
Read more01
Slabs and systems
Yes, once the old paint is gone. Coatings bond to a rough, clean profile, and paint or peeling sealer blocks that. We diamond grind the floor back to bare concrete, fill cracks, check moisture, then lay the new system. Skipping removal is how floors lift.
Usually, with prep. Concrete needs at least 28 days before coating, which a finished home has passed. The catch is the slick surface and any curing compound the builder sprayed. Acid etching won't remove it, so we grind it off to give the coat something to grip.
Every slab. Moisture moving up through concrete is the top cause of coatings lifting, after poor prep. We run a moisture test first. If the reading is high, the estimate adds a moisture-mitigation primer instead of hoping the floor holds.
Plain epoxy is aromatic and ambers under UV. For a garage that sits open to the sun, or any outdoor surface, we use an aliphatic polyaspartic or polyurea, which keeps its color. A standalone polyaspartic system avoids the issue entirely.
Yes. MacDonald Highlands has two guard-gated entries, and we set up gate access with you before the work day so the equipment gets in. The same goes for any gated street elsewhere in the city.
02
Scheduling and HOAs
Yes. Heat speeds cure and cuts working time, so batch size and timing change in summer, not whether we work. We time coats to slab temperature, because coating a warming slab can trap air bubbles. Walk-on and drive-on times come with your estimate.
It depends on your association. Interior garage floors and driveways are often treated differently, and driveway coatings are where design rules usually apply. Check your HOA's rules before booking; we describe the system and color in writing so your submission has what it needs.
We coat and texture existing concrete pool decks, including cool deck finishes, and patios. We don't touch pool plumbing, heaters, lights or equipment. Timing depends on the deck's condition and repairs, so we give it after seeing the deck, not as a set number of days.
It depends on prep, film thickness, sun and traffic more than on the label. A thin film on a poorly prepped slab can fail early from hot-tire pickup. A ground, moisture-checked slab under a high-solids base and a hard topcoat holds up far longer. Care tips come in writing.
Clear the garage floor, including shelves that sit on the slab, and park outside. Tell us about oil spots or old repairs. If you live behind a gate, leave our names with the guard so the grinder and materials get in.